Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

W波段UAV MISAR实时成像运动补偿方法

建立了实时成像正侧视合成孔径雷达(SAR)运动误差模型,采用了一种基于惯导和相位梯度自聚焦(PGA)运动误差估计的中心波束平面运动补偿算法。该算法对回波包络和相位进行分开补偿,利用惯导数据把带有运动误差的回波包络拉直,再利用相位梯度自聚焦算法对回波进行相位误差估计并补偿。针对实时成像的时间少、运算量大、运算资源受限等特点,该算法取消了距离徙动校正的步骤,将运动误差矢量在斜距平面投影并完成包络校正和相位误差估计。该方法运算量小,同时能满足分辨率要求。仿真结果表明:该方法能够得到质量较高的SAR图像。     

基于遥测数据的无人机气动参数辨识方法研究

针对无人机在高空低速飞行时易受风场影响及在数据分析时遥测数据不完备的问题,进行了气动参数辨识方法研究,提出了基于空速管平面矢量三角形的风场估计方法及基于风场信息修正的气动角估计方法。以某型无人机为例,对遥测数据进行了充分分析与信息综合,运用逐步回归方法进行了纵向气动参数辨识,并进行了实验验证。结果表明,模型计算结果与实测数据吻合较好,说明所提方法有效。考虑到辨识模型的数学本质,该方法对其他固定翼无人机同样适用。     

PSO-LSSVM在民机气动性能数学建模上的应用

目前风洞试验仅为民用飞机飞行性能提供有限数据.全飞行包线的技术支持对于民机飞行试验十分重要,需要采用数学建模和参数辨识的方法.选择合适的机器学习算法是参数辨识中最为关键的一步.支持向量机(SVM)采用结构风险最小化原理,尤其适用于小样本情形.根据A320非巡航起降阶段的几组真实数据,以及全机气动力估算的结果,使用最小二乘支持向量机建立预测模型.随后采用粒子群算法优化模型参数从而提升泛化能力.由此实现民机飞行包线的气动性能整体建模与辨识.与Ma=0.78时的实验数据相比较,PSO-LSSVM模型的预测结果吻合,是一种有效的气动数学建模方法.     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

含间隙运动控制系统中的定位抖动和 速率波动原因分析及解决措施

针对一类含间隙大惯量非直驱转动系统中出现的速率波动现象,利用描述函数法和计算仿真的方法进行了原因分析.在通常的解决措施如双电机消隙、机械消隙方法之外,针对一类间隙可测量的运动控制系统,提出了解决该类问题的新思路,即通过间隙的间接测量,利用反馈机制进行间隙补偿,并用小增益定理证明了其稳定性.实现了部分电气消隙的作用,在适当降低跟踪精度的情况下,消除了定位抖动,提高了速率平稳性.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

基于自适应容积粒子滤波的车辆状态估计

针对车辆状态估计中由模型的强非线性、噪声的非高斯分布等相关因素导致估计精度下降甚至发散的问题,本文提出了基于自适应容积粒子滤波(Adaptive cubature particle filter,ACPF)的车辆状态估计器。首先基于非稳态动态轮胎模型,构建高维度非线性八自由度车辆模型。其次利用自适应容积卡尔曼滤波(Adaptive cubature Kalman filter,ACKF)算法更新基本粒子滤波(Particle filter,PF)算法的重要性密度函数,以完成自适应容积粒子滤波算法设计。利用车载传感器信息,运用ACPF算法实现对车辆的侧倾角、质心侧偏角等关键状态变量高精度在线观测。搭建Simulink-Carsim联合仿真平台进行了算法的验证,结果表明该算法状态估计精度高于传统无迹粒子滤波(Unscented particle filter,UPF)算法,且算法运算效率高于UPF算法,而传统PF估计值发散。研究结果为实现车辆动力学精准控制提供了理论支持。     

蜻蜓起飞过程飞行特征实验

针对蜻蜓自由起飞过程和准自由起飞过程进行实验观测,采用两个光轴相互垂直的高速摄像机进行拍摄,通过特征点匹配和三维重构方法准确地捕捉了两种起飞过程中蜻蜓身体和翅膀的运动参数,并进行运动特征分析与对比。实验结果表明:蜻蜓在自由起飞过程中采用同步振翅,离地后逐步转换成异步振翅(约110°),最大瞬时竖直加速度可以达到20m/s2;在准自由起飞过程中采用异步振翅(相位差180°),之后相位差逐步降低,最大瞬时竖直加速度为12m/s2;此外发现同步振翅、大攻角下拍及大拍动角有利于升力的产生。